T-3 24 Valve Stainless Diesel Exhaust Manifold

T-3  24 Valve Stainless Diesel Exhaust Manifold

Proposition 65

WARNING: Cancer - https://www.p65warnings.ca.gov/

Share Your Build!

When sharing on Social Media tag us! 

Builds, burnouts, drag racing, truck pulling, towing or Show-n-shine!

#StainlessDiesel

Release of Liability

WARNING: High performance products are intended for OFF ROAD USE ONLY! Removing factory exhaust emissions equipment such as Exhaust Gas Recirculation (EGR), Catalytic Converter, or Diesel Particulate Filter (DPF), is against federal regulations set forth by the EPA. By purchasing or installing any of our high performance products, the customer releases Stainless Diesel of any liability, and assumes all responsibility for making sure the vehicle complies with all local, state, and federal emissions regulations. By installing any products purchased from Stainless Diesel the customer assumes all risks, including but not limited to, loss of vehicle warranty, fines, and penalties. Stainless Diesel can in no way be held liable for any of the customer’s actions.

T-3 Stainless Diesel Cummins Exhaust manifold. 24v Sled Puller Stainless Diesel exhaust manifolds come with 2 ports drilled and tapped for EGT & Drive. Our Stainless Exhaust mainfolds are made with shell molding. Its a super smooth inside and out casting technology that has superior flow over and above the old type 60 grit sand paper like and filling casting that all the other exhaust manifolds are made from. The manifolds have 3/4 inch thick center section [for those of you that like to custom port to your specs]. Thick wall casting to keep heat in and the inside runner sizing is 1.650 inches all the way to the center outlet for high flow. The stainless manifolds make large turbos more drive-able & improves spool-up several hundred RPM's. Improves horsepower and widens powerband. Increased economy, when installed with same mods. Excellent fit & finish! Has superior flow over the competors. Large 1.65" ports, full length to collector foot. Smooth runners with extra porting room. T-3 Stainless Diesel manifold is in the same location as the OEM manifold. It's a direct factory replacement for your Dodge Cummins truck.

Write a review

Please login or register to review

Additional Savings

Follow us on Facebook & Instagram

Enjoy an additional discount. Use code SDFBFAN at checkout!

  • Views: 10566
  • Brand: Stainless Diesel
  • Product Code: SD2G24VT3
  • Reward Points: 32
  • Availability: 50
137 Product(s) Sold
  • $650.00
  • Price in reward points: 3250

Available options

Customer Selfies Review(0)

Stainless Steel Cummins Exhaust manifold T-3 12 Valve Sled Puller Stainless Diesel exhaust mani..
$675.00
THIS KIT ONLY FITS s300 SXE turbos With or Without the cover modified for use with V-Band!This kit ..
$699.00
Includes:  Exhaust Manifold To Engine Block - 6 piece*How to tell the difference if you have a ..
$29.00
Stainless Diesel's Complete Twin/Compound Turbo Kits for Dodge Diesels. Our 2nd Gen Dodge kits..
$3,941.00
Stainless Diesel's Twin/Compound Turbo Piping Kits for Dodge Diesels. Our 3rd and 4th Gen..
$1,849.00
Double BatMoWheel S362 Race cover 68mm turbine wheel T-3 12 or 14 wastegated Billet S362..
$2,235.00
Includes:  Exhaust Manifold To Engine Block - 6 piece*How to tell the difference if you have a ..
$29.00
22" Stainless steel flexible oil drain line with dual o-ring block fitting.  ..
$70.00
Stainless Diesel's Twin/Compound Turbo Piping Kits for Dodge Diesels. Our 3rd Gen Dodge k..
$2,189.00
2nd Gen Dodge Style Downpipes 4.00" 1 piece Mild steel or 409 Stainless Steel Mandre..
$79.00
Aluminum 90 degree Elbow - fits a S400 v-band covers & GT42 style cover.  It has a 3.00"..
$67.99
Turbo to Manifold mounting studs with flange head nuts.Choose SHORT STUDS - for a standard turbo to ..
$19.95
S&B Twin Turbo Air Filter - 5" inlet 12" long Separate listings for Dry or Oiled (This size is ..
$65.00