6.7 Water Relocation Line Kit

6.7 Water Relocation Line Kit

Proposition 65

WARNING: Cancer - https://www.p65warnings.ca.gov/

Share Your Build!

When sharing on Social Media tag us! 

Builds, burnouts, drag racing, truck pulling, towing or Show-n-shine!

#StainlessDiesel

Release of Liability

WARNING: High performance products are intended for OFF ROAD USE ONLY! Removing factory exhaust emissions equipment such as Exhaust Gas Recirculation (EGR), Catalytic Converter, or Diesel Particulate Filter (DPF), is against federal regulations set forth by the EPA. By purchasing or installing any of our high performance products, the customer releases Stainless Diesel of any liability, and assumes all responsibility for making sure the vehicle complies with all local, state, and federal emissions regulations. By installing any products purchased from Stainless Diesel the customer assumes all risks, including but not limited to, loss of vehicle warranty, fines, and penalties. Stainless Diesel can in no way be held liable for any of the customer’s actions.

6.7 Water relocation Kit. This line reroutes the heater core water line.  When removing the stock turbo & adding an aftermarket turbocharger.  This kit is utilized to reroute the factory waterline. Includes a 6.7 water block off plug (installs in the side of the engine block) to block off the passage that was feeding the OEM VGT turbo coolant. Crank case ventilation is provided, as well as the automatic transmission dipstick support bracket.  This kit addresses your needs for relocating the waterline & eliminating the factory components when doing a performance turbo/ manifold upgrade.  These components are also included in with our Single Swap Kits.  (see extra pictures for install photos)

NOTE: 2013-16 Kit will require you to shorten the line length a bit yourself upon install. 

NOTE: 2013-14 have a slightly different location than the 2015-2016 models. These models will require you to mock up & cut the factory water line at the oil filter location above the water supply line that goes to the fire wall water tank.

NOTE: 2007.5 - 2012 trucks with the "auxilary transmission cooler" option --- takes additional components for installation.  Please call for more information.

  • fits 2007.5 - 2016 Dodge Cummins
  • 3rd Gen
  • 4th Gen
  • works for single or twin kits

INCLUDES:

  • Waterline
  • Silicone adapter with clamps
  • 6.7 water block off plug with sealing gasket
  • 1/2" NPT Brass Plug
  • 6.7 dipstick bracket for transmission
  • crank case ventilation hose / clamp kit

Write a review

Please login or register to review

Additional Savings

Follow us on Facebook & Instagram

Enjoy an additional discount. Use code SDFBFAN at checkout!

26 Product(s) Sold
  • $179.00
  • Price in reward points: 895

Customer Selfies Review(0)

2nd Gen Dodge Style Downpipes 4.00" 1 piece Mild steel or 409 Stainless Steel Mandre..
$79.00
Mass air flow sensor (MAF). Mild Steel Weld bung. Fits 2007.5-2017 CR dodge 6.7 liter cummins...
$39.50
S400,  GT42,  3x3   4.62 Turbine outlet flange & clamp Works with 4" pipes Flange & v-b..
$99.00
Aluminum 90 degree Elbow - fits a S400 v-band covers & GT42 style cover.  It has a 3.00"..
$67.99
Turbo to Manifold mounting studs with flange head nuts.Choose SHORT STUDS - for a standard turbo to ..
$19.95
S&B Twin Turbo Air Filter - 5" inlet 12" long Separate listings for Dry or Oiled (This size is ..
$65.00