13-18 FMW 467.7 6.7L Single Swap Turbo & Piping Kit
WARNING: Cancer - https://www.p65warnings.ca.gov/
FMW 467.7 Borg Warner Turbo
STAINLESS DIESEL T-4 24 valve manifold (optional)
Stainless Diesel's 2nd Gen style turbo piping kit for 2013 to 2018 Dodge Diesel trucks.
The stainless Diesel 2nd Gen style turbo piping kit for 3rd gen Dodge Diesel trucks are built with HIGH STRENGTH CND'd flanges & aluminized mild steel piping. Unlike some competitors who use rubber hose & plastic pipes - our kits are strong enough for high boost anytime for many years! This piping kit puts your single turbo in twin position. We find that inverting the manifold (facing upward), helps your turbo spool faster & more efficiently.
BorgWarner Airwerks S400SX3-67.7, S467 FMW (Forged Milled Wheel), with 1.10 Twin Scroll Turbine Housing.
- Compressor: FMW 67.7 mm inducer, 91mm exducer, with exclusive Extended Tip Technology.
- Turbine: 83.5 inducer, 74mm exducer. Cast in Inconel 713 for high-temperature operation.
- Compressor: Race Cover .67, with 5.5" hose-type inlet, and 3" hose discharge standard.
- Standard Size Turbine: T4 1.10 A/R, with 'divided' volute, featuring 'T04-style' turbine inlet flange (3.25"x2.75"), and quick-release v-band discharge flange. Cast in ductile iron.
- Standard Exhaust Housing: T4 1.10
- Optional Exhaust Housing: T4 1.00 (recommended for stock fuel level range up to 700 HP at the tires)
Included in this kit:
- FMW 467.7 Turbo
- Turbo Blanket
- Stainless Diesel Manifold
- High Flow Stainless Diesel cold air kit w/ S&B Airfilter
- Braided stainless steel High Temp Oil Supply Line
- Oil supply line fitting
- Oil drain line
- Oil drain gasket
- Turbo Gaskets
- Turbo Mounting Studs
- Turbo Mounting Bolts
- V-Band Clamp
- High Torque T-Bolt Clamps
- 3.00" Bead-rolled Intercooler Pipe
- 5.00" Air Cleaner Pipe w/ AIT and MAF sensor bungs
- 5.50" to 5.00" boot w/ clamps
- 4.00" Down Pipe (aluminized steel)
- 1.00" Divided Billet Spacer
- Installation instruction packet w/ pictures