Menu
Your Cart

**ALL KITS ARE 1 - 2 WEEK BUILD TIME **

For faster (front of the line) build time - (not including shipping)

find and add the product labeled RUSH FEE...

Piping Kit Parts

From building your own to replacing apart from years of torture, we strive to be your go-to place for all your turbo plumbing needs!

Don’t hesitate to ask if you can’t find it, chances are we have it. 

Brand: Stainless Diesel Model: BH3x10.5SH
*Special 10.50" length sized* 3.00" ID to 3.00" ID x 10.50" long, high temperature, 5 ply straight boot. Strength tested to handle diesel boost..
$34.99
Brand: Stainless Diesel Model: E23004
3rd Gen twin intercooler pipe from S-300 top charger to intercooler. (using 3rd gen turbo cover on 5.9 trucks) This pipe is also used in our single swap kits. Choose your option of uncoated or Flat Black Texture..
$149.00
Model: TM HARDWARE
Turbo to Manifold mounting studs with flange head nuts.Choose SHORT STUDS - for a standard turbo to manifold mountChoose LONG STUDS - If you have a 1" spacer between the turbo & manifold*some manifolds have 4 "threaded" holes*some manifolds have 2 "threaded" & 2 "drilled" holes for mounting the turb..
$19.95
Brand: Stainless Diesel Model: E2090
2 Piece Cold Pipe - Sold as a 2 piece unit for better fitment during your fabrication.Includes:3.50" Straight boot(2) t-bolt clampsO-ring seal for the flange end Optional: V-band Clamp Flat Black Textured CoatingYou may need to add the 3.5-4" reducer boot for the other end  *sold separatel..
$247.00
Model: ALUMDBF
Aluminum straight nipple with o-ring for press fit into the OEM oil drain hole for every year Dodge Cummins. - 3/4" SIZE..
$32.50
Model: AITWB-20
Billet aluminum AIT sensor bung for those of you that are making your own turbo piping kits on a 5.9/6.7 Cummins. INCLUDES: stainless socket head screws5.00″ radius to fit nicely on a 5.00" pipe.available in billet aluminum or mild steel..
$39.50
Brand: Stainless Diesel Model: AITWB
Air Intake Temp. sensor mild steel weld bung for ’03-’20 CR Diesel works with 4" and 5" piping 2 AIT sensor mounting screws included..
$39.50
Model: MAFWB-20
Billet aluminum MAP sensor bung for those of you that are making your own turbo piping kits on a 6.7 Cummins. INCLUDES: stainless socket head screws5.00″ radius to fit nicely on a 5.00" pipe.available in billet aluminum or mild steel..
$39.50
Brand: Stainless Diesel Model: MAFWB
Mass air flow sensor (MAF). Mild Steel Weld bung. Fits 2007.5-2018 CR dodge 6.7 liter cummins...
$39.50
Brand: Stainless Diesel Model: A2390
THIS INTERCOOLER BOOST TUBE IS DESIGNED TO ALLOW YOU TO ADAPT FORWARD FACING (3G STYLE) S300 COMPRESSOR COVERS TO 2G INTERCOOLER. This intercooler pipe is designed to fit a 2G style manifold in stock location on a 2g truck ('94-'02) with a 3G turbo cover.  (s300 forward facing 3rd gen ..
$186.00
Brand: Stainless Diesel Model: W2806GKIT
6.7 Water relocation Kit. This line reroutes the heater core water line.  When removing the stock turbo & adding an aftermarket turbocharger.  This kit is utilized to reroute the factory waterline. Includes a 6.7 water block off plug (installs in the side of the engine block) to block off the passag..
$179.00
Showing 37 to 48 of 55 (5 Pages)