Menu
Your Cart

07.5-12 S300 SXE

07.5-12 S300 SXE
07.5-12 S300 SXE
  • Stock: 10
  • Reward Points: 35
  • Model: 07512-S3SXE-3GSPK
  • Weight: 45.00lb
  • Dimensions: 12.00in x 12.00in x 48.00in
190 sold
Product Views: 349
$699.00
Price in reward points: 3495

Available Options

THIS KIT ONLY FITS s300 SXE turbos With or Without the cover modified for use with V-Band!
This kit only fits 40* angle stock location 2nd generation center outlet turbo mounting flange exhaust manifolds.

Stainless Diesel's 2nd Gen style turbo piping kit for 3rd and 4th gen Dodge Diesel trucks. Drastically lower your EGT's with outstanding efficiency and drive ability when you upgrade to a 2nd gen style manifold and a 3rd gen style S300 turbo. The stainless Diesel 2nd Gen style turbo piping kit for 3rd gen Dodge Diesel trucks are built with HIGH STRENGTH CND'd flanges & aluminized mild steel piping. Unlike some competitors who use rubber hose & plastic pipes - our kits are strong enough for high boost anytime for many years! This piping kit puts your single turbo in twin position.  We find that inverting the manifold (facing upward), helps your turbo spool faster & more efficiently.  This will also make it easier to upgrade to twin turbos later down the road.

Included in this kit:

  • High Flow Stainless Diesel cold air kit w/ S&B Air filter
  • braided stainless steel High Temp Oil Supply Line
  • Oil supply line fittings
  • Oil drain line
  • Press-In Aluminum block drain & silicone drain hose
  • Oil drain gasket
  • Turbo Gaskets
  • Turbo Mounting Studs
  • Turbo Mounting Bolts
  • V-Band Clamp for Down Pipe
  • High Torque T-Bolt Clamps
  • 3.00" Bead-rolled Inter cooler Pipe
  • Silicone Boot for inter cooler pipe to turbo side (2003-2010 5.9 trucks will use the factory IC boot at the inter cooler)
  • 5.00" Air Cleaner Pipe w/ air inlet temperature sensor provision and MAF on 6.7 trucks
  • 4.00" to 5.00" Silicone boot w/ clamps
  • 4.00" Down Pipe (aluminized steel)
  • 1.00"  Divided Spacer
  • Waterline on 2007.5 - 2012 6.7s
  • Crank Case Ventilation kit (only on 2007.5 +)
  • Installation instruction packet w/ pictures
  • REQUIRES 2nd GEN 40* ANGLED MANIFOLD

Write a review

Please login or register to review