Diesel Blow Off Valve Controller Kit

Diesel Blow Off Valve Controller Kit

Proposition 65

WARNING: Cancer - https://www.p65warnings.ca.gov/

DESCRIPTION:
The Turbosmart BOV controller is an electronic device which controls the pressure signal to the BOV. It works by detecting a negative voltage change in throttle position. It then energises a solenoid to vent all of the air out of the BOV cap, causing a pressure differential between the piston of the BOV and the cap which will vent pressure from the intake system.

 

Large diesel engines with larger turbochargers can experience compressor surge when coming off the throttle. The deceleration of the engine can be a restriction on the outlet of the turbocharger causing compressor surge. This can be disastrous on a turbo system which is producing high amounts of boost. The BOV controller can vent this build up of pressure, protecting the turbocharger. This can reduce the amount of rebuilds on your turbocharger as well as improve acceleration between gears.

APPLICATION:
Ideal for diesel engines.

SUPPLIED WITH:
BOV Controller, Specific Race Port BOV, Wiring loom, Solenoid and bracket, Reinforced pressure tubing, Hose clamps and mounting hardware.

FUNCTIONS:

Sensitivity: How sensitive the controller is to negative changes in throttle movement.

Duration: How long the solenoid stays open to bleed out the air from the BOV (i.e how long the BOV is open for) The solenoid will reactivate when the BOV controller reads positive throttle movement to close the BOV and pressurize the intake system.

Enable: Keeps the solenoid energized. This can be used as a boost limiting function as the BOV will bleed air out lowering the boost levels entering the engine.

Disable: Disables the BOV controller and returns the intake system to its factory setting.

IMPORTANT EMISSIONS NOTE: This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use, may be a violation of local, state and federal laws. It is the buyer's responsibility to verify legal use of this product for the intended application and use.

 
The Turbosmart Diesel BOV Controller Kit comes complete with all the necessary mounting hardware. It is available with a choice of a blue or black Race Port valve.
 
 

Write a review

Please login or register to review

  • Views: 2688
  • Product Code: BOV
  • Availability: 15
  • $461.00

Additional Savings

Follow us on Facebook & Instagram

Enjoy an additional discount. Use code SDFBFAN at checkout!

Customer Selfies Review(0)

360* Thrust Bearing upgrade Kit.  This is available for S500, S400, S300 based turbo charger..
$239.00
STAINLESS DIESEL T-4 24 valve manifold The 2nd Gen style turbo piping kit for 2003-2007 Stainless ..
$1,675.00
T-3 Gated Housing Turbo Blankets isolate the heat produced by your turbocharger with the purpose o..
$149.00
2nd Gen Dodge Style Downpipes 4.00" 1 piece Mild steel or 409 Stainless Steel Mandre..
$79.00
Aluminum 90 degree Elbow - fits a S400 v-band covers & GT42 style cover.  It has a 3.00" hose on ..
$67.99
Turbo to Manifold mounting studs with flange head nuts.Choose SHORT STUDS - for a standard turbo to ..
$19.95
S&B Twin Turbo Air Filter - 5" inlet 12" long Separate listings for Dry or Oiled (This size is us..
$65.00