2G Swap Kit - Intercooler Pipe Install

Posted by urgirlamy 06/25/2019 0 Comment(s)

Heys Guys,

I’m having issues installing the intercooler pipe for my turbo kit. I’ve got a 2015 ram 3500 w/ 6.7 Cummins. I purchased the 2nd gen swap kit from Hardway performance. The turbo is the 465. Can you help with some pointers to install the intercooler pipe. Not sure which direction the pipe goes. Would y’all happen to have any pictures?




It will be necessary to slightly bend  the aluminum trans lines   Or additional clearance, as seen here ...


As you can see the 90° aluminum elbow faces the front portion of the truck.  The 90° bend in the intercooler pipe then attaches at that point with the 3.00" to 3.00" silicone coupler provided.

The portion of the pipe that has a 45° angle installs at the Intercooler facing vertically.  And then attaches utilizing the provided 3.00" to 2.75” reducing cupler.

The extra water bottle hose needs to be capped off.  Hope this helps.

Leave a Comment